Why Choose Steel Fence for Your Home
Steel fences are strong and last a long time. They don’t warp or rot like wood, and they handle bad weather well. Whether you want privacy, security, or just a nice border around your yard, steel fencing works well. It’s a solid choice for homes, gardens, and even businesses.

Tools and Materials You’ll Need
Before you start, gather these:
● Steel fence panels and posts
● Post hole digger or power auger
● Concrete mix and some gravel for drainage
● Level, tape measure, string line, and stakes
● Drill with metal bits and screwdriver heads
● Gloves and safety glasses

Guardian Built sells complete steel fence kits that come with everything you need. They also offer free shipping across the U.S. Check out their kits at Guardian Built’s website.

Step 1: Plan and Mark Your Fence Layout
Measure your yard carefully. Use stakes and string to mark where the posts will go. Usually, posts are 6 to 8 feet apart, depending on your panels. Check your local rules to make sure your fence height and placement are allowed. Also, call 811 before you dig to avoid hitting underground pipes or cables.

Step 2: Dig Holes for Fence Posts
Dig holes about one-third the length of your posts deep — usually 2 to 3 feet. Make the holes about three times as wide as the post diameter. Put 4 to 6 inches of gravel at the bottom to help water drain away and keep posts from rusting or moving.

Step 3: Set Your Posts in Concrete
Put each post in its hole and use a level to make sure it’s straight up and down. Pour concrete around the post, sloping the top away to keep water from pooling. Let the concrete set for at least 24 hours before you attach the panels.

Step 4: Attach Fence Panels
Start at one end and screw the panels to the posts using the screws or brackets that come with your kit. Make sure the panels are level and spaced evenly. Work your way down the line, tightening everything as you go.

Step 5: Install Gates and Final Details
If your fence has gates, install the gate posts and hardware next. Check that the gates open and close easily and latch well. Walk along the fence and check for any loose screws or sharp edges. Touch up any scratches with rust-proof paint to keep your fence looking good.

Why Guardian Built Is a Great Choice
Guardian Built offers steel fence kits that are easy to install yourself. Their kits come with all the parts you need, plus clear instructions. Best of all, they ship free anywhere in the U.S., which helps you save money. If you want a good deal on steel fencing, check out Guardian Built’s steel fence kits.

Tips for a Smooth Fence Installation
● Take your time to get the posts perfectly vertical — it makes a big difference.
● Use galvanized or coated steel to stop rust.
● Always wear gloves and safety glasses when working with metal.
● If your yard slopes, use stepped or raked panels to keep the fence looking neat.
● Keep your work area clean to avoid losing screws or tools.

FAQs About Installing Steel Fences

1. How deep should I dig post holes?
Dig about 2 to 3 feet deep, or one-third the post length, and make the hole wide enough for stability.

2. Can I install a steel fence on sloped ground?
Yes. Use panels designed to step or rake with the slope for a clean look.

3. How long does concrete take to dry?
Concrete usually needs 24 hours to set before you can attach panels.

4. Does Guardian Built offer free shipping?
Yes, all their steel fence kits ship free across the U.S.

5. What kind of maintenance does a steel fence need?
Steel fences need little upkeep. Check for rust or damage once a year and paint over scratches to protect them.

Sources and Further Reading
1. ALEKO Products – How to Install a Metal Fence in 10 Simple Steps
2. Cavatorta Group – How to Simply and Safely Install a Metal Fence
3. Metalcraft Group – Metal Fencing Installation Guide (Nov 2023)
4. Home Depot – How to Install a Chain Link Fence
5. Iron Fence Shop – DIY Fence Installation Help